**** bug reports here ****

[dekard]

FYI: modcpstill broken

Yes, I'm aware and its on the short list.

[synaps3]

Something that needs fixed real quick is the sigs. I was going to make this my sig:

-Project Synaps3 - on hiatus. (e6300, 2Gb PC2 8000RAM ,GA965p-DS3, and enough WC gear to choke a moose)
-P4 HTPC (P4 2.2GHz, 768Mb RAM, ATI all-in-wonder, etc)
-Dell Latitude X300(1) (Pentium M 1.4GHz, 640Mb RAM)
-Dell Latitude X300(2) (identical to above. Saved from dumpster, nothing is stock but the chassis and mobo)
-P3 Server(1) (P3 1GHz, 768Mb RAM, NVIDIA5200)
-P3 Server(2) (P3 1GHz, 768Mb RAM, NVIDIA5200)
-P4 Server(1) (P4 1.8GHz, 512Mb RAM, NVIDIA 5500)
-P4 Server(2) (P4 1.8GHz, 1Gb RAM, NVIDIA 5500)
-Gateway 200STM (will be picture frame project, eventually. Has no chassis.)

If at first you don’t succeed, call it version 1.0.

But it says it is too long. It isn't. There is a 15-line limit for that text size, and it says I have hit a character limit of 1000. Then, I get rid of the last line, and it says there is a limit of 500.

[dekard]

Something that needs fixed real quick is the sigs. I was going to make this my sig:

-Project Synaps3 - on hiatus. (e6300, 2Gb PC2 8000RAM ,GA965p-DS3, and enough WC gear to choke a moose)
-P4 HTPC (P4 2.2GHz, 768Mb RAM, ATI all-in-wonder, etc)
-Dell Latitude X300(1) (Pentium M 1.4GHz, 640Mb RAM)
-Dell Latitude X300(2) (identical to above. Saved from dumpster, nothing is stock but the chassis and mobo)
-P3 Server(1) (P3 1GHz, 768Mb RAM, NVIDIA5200)
-P3 Server(2) (P3 1GHz, 768Mb RAM, NVIDIA5200)
-P4 Server(1) (P4 1.8GHz, 512Mb RAM, NVIDIA 5500)
-P4 Server(2) (P4 1.8GHz, 1Gb RAM, NVIDIA 5500)
-Gateway 200STM (will be picture frame project, eventually. Has no chassis.)

If at first you don’t succeed, call it version 1.0.

But it says it is too long. It isn't. There is a 15-line limit for that text size, and it says I have hit a character limit of 1000. Then, I get rid of the last line, and it says there is a limit of 500.

Perhaps the explanation isn't clear but that doesn't mean its broken. Its a 1,000 Maximum Characters in Signature Including BBCode Markup and a 500 Maximum Characters in Signature Excluding BBCode Markup.

[Wheelie]

Something that needs fixed real quick is the sigs. I was going to make this my sig:

-Project Synaps3 - on hiatus. (e6300, 2Gb PC2 8000RAM ,GA965p-DS3, and enough WC gear to choke a moose)
-P4 HTPC (P4 2.2GHz, 768Mb RAM, ATI all-in-wonder, etc)
-Dell Latitude X300(1) (Pentium M 1.4GHz, 640Mb RAM)
-Dell Latitude X300(2) (identical to above. Saved from dumpster, nothing is stock but the chassis and mobo)
-P3 Server(1) (P3 1GHz, 768Mb RAM, NVIDIA5200)
-P3 Server(2) (P3 1GHz, 768Mb RAM, NVIDIA5200)
-P4 Server(1) (P4 1.8GHz, 512Mb RAM, NVIDIA 5500)
-P4 Server(2) (P4 1.8GHz, 1Gb RAM, NVIDIA 5500)
-Gateway 200STM (will be picture frame project, eventually. Has no chassis.)

If at first you don’t succeed, call it version 1.0.

But it says it is too long. It isn't. There is a 15-line limit for that text size, and it says I have hit a character limit of 1000. Then, I get rid of the last line, and it says there is a limit of 500.

why not do what Jebo did?

http://www.overclockingwiki.org/inde...=User:Jebo_4jc

[synaps3]

Because it doesn't show off on the forums. :P